Something went wrong. Please try saving your Job Alert again.
Invalid email address
You can save a maximum of 20 Job Alerts. You will need to delete (or modify) one of your existing Job Alerts.
Job Alert already exists. View Job Alert
Displaying 26-50 of 121 jobs
The position you are looking for is no longer available, but here are some similar jobs that might interest you
Posted 28/05/2024 by MPI Limited
Ideally a recognised apprenticeship. Ability to work from instruction. Clear demonstration of safety behaviour. Full valid UK driving licence (or equivalent) – essential. Valid Construction Skills Certification Scheme [CSCS] card. Valid National Water Hygiene card. PERSON PROFILE. Customer … more
Posted 21/05/2024 by CK Group- Science, Clinical and Technical
A level 3 apprenticeship in mechanical, electrical or maintenance engineering. Strong maintenance experience gained in a manufacturing environment. Expert knowledge of pneumatic and hydraulic systems. Knowledge of electrical maintenance and calibration is very desirable. Our client can … more
Posted 2 weeks ago by Jonathan Lee Recruitment Ltd
C&G / BTEC L3 in mechanical or automotive engineering with a recognised apprenticeship. Fundamental understanding of vehicle disassembly, assembly, & maintenance techniques. Vehicle system knowledge with the ability to fault find. Excellent organisational skills. To apply for this position … more
Posted 30/05/2024 by Manpower UK Ltd
A recognised Fabrication Apprenticeship to N/SVQ Level 3 as a minimum. To be comfortable working at heights and in confined spaces. Arc Air Gouging, grinding, and burning experience is desirable. Previous experience of working within the heavy engineering/marine defence industry would be … more
Posted 28/05/2024 by Manpower UK Ltd
You need to have an ONC, HNC, HND or Time Served apprenticeship, have good technical skills, manufacturing experience and have the ability to interpret Engineering Drawings. … more
Posted a week ago by Highbury Recruitment
You should be educated to a level 3 in engineering or have done an apprenticeship or equivelent to either of these. Working Hours: 37.5 hours/week. Mon-Thu 7:45-16:30 (12:30-13:00 unpaid lunch break. Fri 7:45-12:15 (no lunch break. Hourly rate to be discussed. Please email Cv's to Laura @ … more
Posted a week ago by Line Up Aviation
You will be a qualified Fabricator, having completed either an Indentured Apprenticeship or Level 3 Modern Apprenticeship in a sheet metal, structural steel or fabrication related discipline. The ability to read engineering drawings and interpret work instructions. Highly competent … more
Posted 4 days ago by DK Recruitment
Indentured Apprenticeship in mechanical discipline. Level 3 Modern Apprenticeship in a mechanical discipline. Level 3 Mechanical Engineering Qualification. Working Hours. 35 hours per week. Monday to Thursday: 07:30 - 15:30 Friday: 07:30 - 12:30. Potential for shifts and overtime. … more
Posted a week ago by RSD Technology
It is preferable that the jobholder should be qualified to HNC level, which will normally. have been obtained through a craft apprenticeship or hold a Modern Apprenticeship. certificate. He/she should have several years' plant experience in relevant equipment. Must be capable of … more
Posted a week ago by DATS Recruitment Ltd
Essential: Minimum of a time-served apprenticeship within a Mechanical Engineering discipline, equivalent to either City and Guilds Level 3, or NVQ Level 3. Desirable: HNC / HND qualified or equivalent, with a Mechanical Engineering bias (desirable. Skilled Mechanical Fitter Experience. … more
Posted 4 days ago by Jonathan Lee Recruitment Ltd
To apply for this Engine Test Technician role, you will require City & Guilds / NVQ Level 3 in Motor Vehicle Mechanics, Apprenticeship served in Motor Mechanics or equivalent qualifications. You will also require. Good engine and mechanical diagnostic/problem solving skills. Previous … more
Posted 28/05/2024 by Castleview Group
The jobholder must have served a recognised apprenticeship in either mechanical or electrical engineering. S/he must be qualified to 17th or preferably 18th edition wiring regulations. Pneumatics, hydraulics, and PLC experience would be advantageous. experience in installations and project … more
Posted 20/05/2024 by Innovate Recruitment Ltd
Completed an Electrical Maintenance/Engineering Apprenticeship. Qualified to NVQ level 3 or equivalent. Familiar with organisational safety requirements e.g. Isolation & Permit's to Work. … more
Posted a week ago by Randstad Technologies Recruitment
Engineering or motor mechanics apprenticeship / NVQ level 3 / relevant work experience. Knowledge of Mechanical, hydraulic and electrical. knowledge of power-trains and machines. knowledge of instrumentation and its application. Experience with hand/power tools, lifting and equipment. PC … more
Posted 2 weeks ago by Jonathan Lee Recruitment Ltd
C&G / BTEC L3 would be preferable, ideally in mechanical, Electrical or automotive engineering with a recognised apprenticeship or qualification within a relevant field. To apply for this position please send your CV to. Unfortunately we cannot progress candidates who require sponsorship to … more
Posted 2 weeks ago by Jonathan Lee Recruitment Ltd
C&G / BTEC L3 would be preferable, ideally in mechanical, Electrical or automotive engineering with a recognised apprenticeship or qualification within a relevant field. To apply for this position please send your CV to. Unfortunately we cannot progress candidates who require sponsorship to … more
Posted a week ago by ATA Recruitment
Electrical Apprenticeship, NQV Level 3 or equivalent. Site experience would be beneficial. ECS Desirable. The benefits of this position. Competitive hourly rates. Immediate start. Realistic chance of contract extension. To be considered for this role please either hit the 'Apply' button on … more
Posted 4 days ago by Team Jobs - Strategic Accounts
Engineering Apprenticeship (Desirable but not Essential. Knowledge of machining, specifically Manual Turning or relative machining experience. Knowledge of hand measuring equipment, such as Vernier, Micrometer, Thread and Plug. Gauges. Working in a Customer-focused environment and achieving … more
Posted 17/05/2024 by Pioneer Selection Ltd
Ideally, you will hold a NVQ Level 3 in Mechanical Engineering or hold a Mechanical Apprenticeship. Worked within a Workshop, Field Service or Mechanical Manufacturing environment. A keen eye for detail. A working knowledge of reading and understanding mechanical drawings. A sound knowledge … more
Posted 28/05/2024 by Omega Resource Group
Full indentured apprenticeship or relevant knowledge & experience highlighted on CV. Experienced in all aspects of workshop practise. Experience in all aspects of Production Machining both Manual & CNC. Experience and knowledge in working with Duplex and Nickel Alloy Materials. Good … more
Posted 30/05/2024 by Morson Talent
Ideally C&G / BTEC L3 in mechanical or automotive engineering with a recognised apprenticeship. Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. Vehicle system knowledge with the ability to fault find. Fully proficient in the fundamental practical … more
Posted 8 hours ago by Sunny Recruitment
A recognized apprenticeship. or NVQ level 3 in mechanical and/or electrical disciplines. or City & Guilds 2330. IET 17/18th Edition Wiring Regulations IND123. #sunnyjobs. Applications are encouraged from all sections of the community. … more
Posted 30/05/2024 by Morson Talent
C&G / BTEC L3 would be preferable, ideally in mechanical, Electrical or automotive engineering with a. recognised apprenticeship or qualification within a relevant field. Fully proficient in the fundamental practical mechanical / Electrical skills required for this role. (preferably … more
Posted 21/05/2024 by MPI Limited
Apprenticeship trained or appropriate equivalent experience. Flexibility, motivation and commitment. Minimum five years previous experience allied to a proven ability to correctly interpret manufacturing information and carry out related self-inspection tasks. Capable of working with … more
Posted 21/05/2024 by E3 Recruitment
Hold formal qualifications within Mechanical Engineering (Apprenticeship, HNC, HND or similar. Have previous experience working in a relevant role, ideally within a heavy engineering environmentWorking hours of the Quality Inspector. The core working hours of this position are detailed … more
